Edit File: UCD-DISKIO-MIB.txt
UCD-DISKIO-MIB DEFINITIONS ::= BEGIN -- -- Derived from the original VEST-INTERNETT-MIB. Open issues: -- -- (a) where to register this MIB? -- (b) use not-accessible for diskIOIndex? -- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Counter64 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC ucdExperimental FROM UCD-SNMP-MIB; ucdDiskIOMIB MODULE-IDENTITY LAST-UPDATED "201604040000Z" ORGANIZATION "University of California, Davis" CONTACT-INFO "This mib is no longer being maintained by the University of California and is now in life-support-mode and being maintained by the net-snmp project. The best place to write for public questions about the net-snmp-coders mailing list at net-snmp-coders@lists.sourceforge.net. postal: Wes Hardaker P.O. Box 382 Davis CA 95617 email: net-snmp-coders@lists.sourceforge.net " DESCRIPTION "This MIB module defines objects for disk IO statistics." REVISION "201604040000Z" DESCRIPTION "Add 64-bit counter for busy micro-seconds." REVISION "200504200000Z" DESCRIPTION "Add 64 bit counters. Patch from Dan Nelson." REVISION "200202130000Z" DESCRIPTION "Add 1, 5 and 15-minute load average objects" REVISION "200001260000Z" DESCRIPTION "SMIv2 version derived from older definitions contained in the VEST-INTERNETT-MIB module." ::= { ucdExperimental 15 } diskIOTable OBJECT-TYPE SYNTAX SEQUENCE OF DiskIOEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of IO devices and how much data they have read/written." ::= { ucdDiskIOMIB 1 } diskIOEntry OBJECT-TYPE SYNTAX DiskIOEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a device and its statistics." INDEX { diskIOIndex } ::= { diskIOTable 1 } DiskIOEntry ::= SEQUENCE { diskIOIndex Integer32, diskIODevice DisplayString, diskIONRead Counter32, diskIONWritten Counter32, diskIOReads Counter32, diskIOWrites Counter32, diskIOLA1 Integer32, diskIOLA5 Integer32, diskIOLA15 Integer32, diskIONReadX Counter64, diskIONWrittenX Counter64, diskIOBusyTime Counter64 } diskIOIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference index for each observed device." ::= { diskIOEntry 1 } diskIODevice OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the device we are counting/checking." ::= { diskIOEntry 2 } diskIONRead OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes read from this device since boot." ::= { diskIOEntry 3 } diskIONWritten OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes written to this device since boot." ::= { diskIOEntry 4 } diskIOReads OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of read accesses from this device since boot." ::= { diskIOEntry 5 } diskIOWrites OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of write accesses to this device since boot." ::= { diskIOEntry 6 } diskIOLA1 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The 1 minute average load of disk (%)" ::= { diskIOEntry 9 } diskIOLA5 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The 5 minute average load of disk (%)" ::= { diskIOEntry 10 } diskIOLA15 OBJECT-TYPE SYNTAX Integer32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The 15 minute average load of disk (%)" ::= { diskIOEntry 11 } diskIONReadX OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes read from this device since boot." ::= { diskIOEntry 12 } diskIONWrittenX OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes written to this device since boot." ::= { diskIOEntry 13 } diskIOBusyTime OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of usecs the drive has been busy since boot." ::= { diskIOEntry 14 } END
Back to File Manager