Edit File: MTA-MIB.txt
MTA-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, Counter32, Gauge32, MODULE-IDENTITY, mib-2 FROM SNMPv2-SMI TimeInterval FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB applIndex, URLString FROM NETWORK-SERVICES-MIB; mta MODULE-IDENTITY LAST-UPDATED "200003030000Z" ORGANIZATION "IETF Mail and Directory Management Working Group" CONTACT-INFO " Ned Freed Postal: Innosoft International, Inc. 1050 Lakes Drive West Covina, CA 91790 US Tel: +1 626 919 3600 Fax: +1 626 919 3614 E-Mail: ned.freed@innosoft.com" DESCRIPTION "The MIB module describing Message Transfer Agents (MTAs)" REVISION "200003030000Z" DESCRIPTION "This revision, published in RFC 2789, changes a number of DisplayStrings to SnmpAdminStrings. Note that this change is not strictly supported by SMIv2. However, the alternative of deprecating the old objects and defining new objects would have a more adverse impact on backward compatibility and interoperability, given the particular semantics of these objects. The defining reference for distinguished names has also been updated from RFC 1779 to RFC 2253." REVISION "199905120000Z" DESCRIPTION "This revision fixes a number of technical problems found in previous versions: The conformance groups for different versions of this MIB have been corrected, the recommendation that an empty string be returned if the last operation was successful has been removed from mtaGroupInboundRejectionReason and mtaGroupOutboundConnectFailureReason as it conflicts with the stated purpose of these variables, and the required mtaStatusCode entry has been added to MtaGroupErrorEntry. It should be noted that this last change in no way affects the bits on the wire." REVISION "199708170000Z" DESCRIPTION "This revision, published in RFC 2249, adds the mtaGroupDescription and mtaGroupURL fields, conversion operation counters, a group hierarchy description mechanism, counters for specific errors, oldest message IDs, per-MTA and per-group loop counters, and a new table for tracking any errors an MTA encounters." REVISION "199311280000Z" DESCRIPTION "The original version of this MIB was published in RFC 1566" ::= {mib-2 28} mtaTable OBJECT-TYPE SYNTAX SEQUENCE OF MtaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holding information specific to an MTA." ::= {mta 1} mtaEntry OBJECT-TYPE SYNTAX MtaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry associated with each MTA." INDEX {applIndex} ::= {mtaTable 1} MtaEntry ::= SEQUENCE { mtaReceivedMessages Counter32, mtaStoredMessages Gauge32, mtaTransmittedMessages Counter32, mtaReceivedVolume Counter32, mtaStoredVolume Gauge32, mtaTransmittedVolume Counter32, mtaReceivedRecipients Counter32, mtaStoredRecipients Gauge32, mtaTransmittedRecipients Counter32, mtaSuccessfulConvertedMessages Counter32, mtaFailedConvertedMessages Counter32, mtaLoopsDetected Counter32 } mtaReceivedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages received since MTA initialization. This includes messages transmitted to this MTA from other MTAs as well as messages that have been submitted to the MTA directly by end-users or applications." ::= {mtaEntry 1} mtaStoredMessages OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages currently stored in the MTA. This includes messages that are awaiting transmission to some other MTA or are waiting for delivery to an end-user or application." ::= {mtaEntry 2} mtaTransmittedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages transmitted since MTA initialization. This includes messages that were transmitted to some other MTA or are waiting for delivery to an end-user or application." ::= {mtaEntry 3} mtaReceivedVolume OBJECT-TYPE SYNTAX Counter32 UNITS "K-octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total volume of messages received since MTA initialization, measured in kilo-octets. This volume should include all transferred data that is logically above the mail transport protocol level. For example, an SMTP-based MTA should use the number of kilo-octets in the message header and body, while an X.400-based MTA should use the number of kilo-octets of P2 data. This includes messages transmitted to this MTA from other MTAs as well as messages that have been submitted to the MTA directly by end-users or applications." ::= {mtaEntry 4} mtaStoredVolume OBJECT-TYPE SYNTAX Gauge32 UNITS "K-octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total volume of messages currently stored in the MTA, measured in kilo-octets. This volume should include all stored data that is logically above the mail transport protocol level. For example, an SMTP-based MTA should use the number of kilo-octets in the message header and body, while an X.400-based MTA would use the number of kilo-octets of P2 data. This includes messages that are awaiting transmission to some other MTA or are waiting for delivery to an end-user or application." ::= {mtaEntry 5} mtaTransmittedVolume OBJECT-TYPE SYNTAX Counter32 UNITS "K-octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total volume of messages transmitted since MTA initialization, measured in kilo-octets. This volume should include all transferred data that is logically above the mail transport protocol level. For example, an SMTP-based MTA should use the number of kilo-octets in the message header and body, while an X.400-based MTA should use the number of kilo-octets of P2 data. This includes messages that were transmitted to some other MTA or are waiting for delivery to an end-user or application." ::= {mtaEntry 6} mtaReceivedRecipients OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of recipients specified in all messages received since MTA initialization. Recipients this MTA has no responsibility for, i.e. inactive envelope recipients or ones referred to in message headers, should not be counted even if information about such recipients is available. This includes messages transmitted to this MTA from other MTAs as well as messages that have been submitted to the MTA directly by end-users or applications." ::= {mtaEntry 7} mtaStoredRecipients OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of recipients specified in all messages currently stored in the MTA. Recipients this MTA has no responsibility for, i.e. inactive envelope recipients or ones referred to in message headers, should not be counted. This includes messages that are awaiting transmission to some other MTA or are waiting for delivery to an end-user or application." ::= {mtaEntry 8} mtaTransmittedRecipients OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of recipients specified in all messages transmitted since MTA initialization. Recipients this MTA had no responsibility for, i.e. inactive envelope recipients or ones referred to in message headers, should not be counted. This includes messages that were transmitted to some other MTA or are waiting for delivery to an end-user or application." ::= {mtaEntry 9} mtaSuccessfulConvertedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that have been successfully converted from one form to another since MTA initialization." ::= {mtaEntry 10} mtaFailedConvertedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages for which an unsuccessful attempt was made to convert them from one form to another since MTA initialization." ::= {mtaEntry 11} mtaLoopsDetected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A message loop is defined as a situation where the MTA decides that a given message will never be delivered to one or more recipients and instead will continue to loop endlessly through one or more MTAs. This variable counts the number of times the MTA has detected such a situation since MTA initialization. Note that the mechanism MTAs use to detect loops (e.g., trace field counting, count of references to this MTA in a trace field, examination of DNS or other directory information, etc.), the level at which loops are detected (e.g., per message, per recipient, per directory entry, etc.), and the handling of a loop once it is detected (e.g., looping messages are held, looping messages are bounced or sent to the postmaster, messages that the MTA knows will loop won't be accepted, etc.) vary widely from one MTA to the next and cannot be inferred from this variable." ::= {mtaEntry 12} -- MTAs typically group inbound reception, queue storage, and -- outbound transmission in some way, rather than accounting for -- such operations only across the MTA as a whole. In the most -- extreme case separate information will be maintained for each -- different entity that receives messages and for each entity -- the MTA stores messages for and delivers messages to. Other -- MTAs may elect to treat all reception equally, all queue -- storage equally, all deliveries equally, or some combination -- of this. Overlapped groupings are also possible, where an MTA -- decomposes its traffic in different ways for different -- purposes. -- In any case, a grouping abstraction is an extremely useful for -- breaking down the activities of an MTA. For purposes of -- labelling this will be called a "group" in this MIB. -- Each group contains all the variables needed to monitor all -- aspects of an MTA's operation. However, the fact that all -- groups contain all possible variables does not imply that all -- groups must use all possible variables. For example, a single -- group might be used to monitor only one kind of event (inbound -- processing, outbound processing, or storage). In this sort of -- configuration any counters that are unused as a result of a -- given MTA's use of the group construct must be inaccessible; -- e.g., returning either a noSuchName error (for an SNMPv1 get), -- or a noSuchInstance exception (for an SNMPv2 get). -- Groups can be created at any time after MTA initialization. Once -- a group is created it should not be deleted or its mtaGroupIndex -- changed unless the MTA is reinitialized. -- Groups are not necessarily mutually exclusive. A given event may -- be recorded by more than one group, a message may be seen as -- stored by more than one group, and so on. Groups should be all -- inclusive, however: if groups are implemented all aspects of an -- MTA's operation should be registered in at least one group. -- This freedom lets implementors use different sets of groups to -- provide different "views" of an MTA. -- The possibility of overlap between groups means that summing -- variables across groups may not produce values equal to those in -- the mtaTable. mtaTable should always provide accurate information -- about the MTA as a whole. -- The term "channel" is often used in MTA implementations; channels -- are usually, but not always, equivalent to a group. However, -- this MIB does not use the term "channel" because there is no -- requirement that an MTA supporting this MIB has to map its -- "channel" abstraction one-to-one onto the MIB's group abstraction. -- An MTA may create a group or group of groups at any time. Once -- created, however, an MTA cannot delete an entry for a group from -- the group table. Deletion is only allowed when the MTA is -- reinitialized, and is not required even then. This restriction -- is imposed so that monitoring agents can rely on group -- assignments being consistent across multiple query operations. -- Groups may be laid out so as to form a hierarchical arrangement, -- with some groups acting as subgroups for other groups. -- Alternately, disjoint groups of groups may be used to provide -- different sorts of "snapshots" of MTA operation. The -- mtaGroupHierarchy variable provides an indication of how each -- group fits into the overall arrangement being used. -- Note that SNMP also defines and uses term "group". MTA groups are -- NOT the same as SNMP groups. mtaGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF MtaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holding information specific to each MTA group." ::= {mta 2} mtaGroupEntry OBJECT-TYPE SYNTAX MtaGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry associated with each MTA group." INDEX {applIndex, mtaGroupIndex} ::= {mtaGroupTable 1} MtaGroupEntry ::= SEQUENCE { mtaGroupIndex INTEGER, mtaGroupReceivedMessages Counter32, mtaGroupRejectedMessages Counter32, mtaGroupStoredMessages Gauge32, mtaGroupTransmittedMessages Counter32, mtaGroupReceivedVolume Counter32, mtaGroupStoredVolume Gauge32, mtaGroupTransmittedVolume Counter32, mtaGroupReceivedRecipients Counter32, mtaGroupStoredRecipients Gauge32, mtaGroupTransmittedRecipients Counter32, mtaGroupOldestMessageStored TimeInterval, mtaGroupInboundAssociations Gauge32, mtaGroupOutboundAssociations Gauge32, mtaGroupAccumulatedInboundAssociations Counter32, mtaGroupAccumulatedOutboundAssociations Counter32, mtaGroupLastInboundActivity TimeInterval, mtaGroupLastOutboundActivity TimeInterval, mtaGroupLastOutboundAssociationAttempt TimeInterval, mtaGroupRejectedInboundAssociations Counter32, mtaGroupFailedOutboundAssociations Counter32, mtaGroupInboundRejectionReason SnmpAdminString, mtaGroupOutboundConnectFailureReason SnmpAdminString, mtaGroupScheduledRetry TimeInterval, mtaGroupMailProtocol OBJECT IDENTIFIER, mtaGroupName SnmpAdminString, mtaGroupSuccessfulConvertedMessages Counter32, mtaGroupFailedConvertedMessages Counter32, mtaGroupDescription SnmpAdminString, mtaGroupURL URLString, mtaGroupCreationTime TimeInterval, mtaGroupHierarchy INTEGER, mtaGroupOldestMessageId SnmpAdminString, mtaGroupLoopsDetected Counter32 } mtaGroupIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index associated with a group for a given MTA." ::= {mtaGroupEntry 1} mtaGroupReceivedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages received to this group since group creation." ::= {mtaGroupEntry 2} mtaGroupRejectedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages rejected by this group since group creation." ::= {mtaGroupEntry 3} mtaGroupStoredMessages OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages currently stored in this group's queue." ::= {mtaGroupEntry 4} mtaGroupTransmittedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages transmitted by this group since group creation." ::= {mtaGroupEntry 5} mtaGroupReceivedVolume OBJECT-TYPE SYNTAX Counter32 UNITS "K-octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total volume of messages received to this group since group creation, measured in kilo-octets. This volume should include all transferred data that is logically above the mail transport protocol level. For example, an SMTP-based MTA should use the number of kilo-octets in the message header and body, while an X.400-based MTA should use the number of kilo-octets of P2 data." ::= {mtaGroupEntry 6} mtaGroupStoredVolume OBJECT-TYPE SYNTAX Gauge32 UNITS "K-octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total volume of messages currently stored in this group's queue, measured in kilo-octets. This volume should include all stored data that is logically above the mail transport protocol level. For example, an SMTP-based MTA should use the number of kilo-octets in the message header and body, while an X.400-based MTA would use the number of kilo-octets of P2 data." ::= {mtaGroupEntry 7} mtaGroupTransmittedVolume OBJECT-TYPE SYNTAX Counter32 UNITS "K-octets" MAX-ACCESS read-only STATUS current DESCRIPTION "The total volume of messages transmitted by this group since group creation, measured in kilo-octets. This volume should include all transferred data that is logically above the mail transport protocol level. For example, an SMTP-based MTA should use the number of kilo-octets in the message header and body, while an X.400-based MTA should use the number of kilo-octets of P2 data." ::= {mtaGroupEntry 8} mtaGroupReceivedRecipients OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of recipients specified in all messages received to this group since group creation. Recipients this MTA has no responsibility for should not be counted." ::= {mtaGroupEntry 9} mtaGroupStoredRecipients OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of recipients specified in all messages currently stored in this group's queue. Recipients this MTA has no responsibility for should not be counted." ::= {mtaGroupEntry 10} mtaGroupTransmittedRecipients OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of recipients specified in all messages transmitted by this group since group creation. Recipients this MTA had no responsibility for should not be counted." ::= {mtaGroupEntry 11} mtaGroupOldestMessageStored OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the oldest message in this group's queue was placed in the queue." ::= {mtaGroupEntry 12} mtaGroupInboundAssociations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current associations to the group, where the group is the responder." ::= {mtaGroupEntry 13} mtaGroupOutboundAssociations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current associations to the group, where the group is the initiator." ::= {mtaGroupEntry 14} mtaGroupAccumulatedInboundAssociations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of associations to the group since group creation, where the MTA was the responder." ::= {mtaGroupEntry 15} mtaGroupAccumulatedOutboundAssociations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of associations from the group since group creation, where the MTA was the initiator." ::= {mtaGroupEntry 16} mtaGroupLastInboundActivity OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last time that this group had an active inbound association for purposes of message reception." ::= {mtaGroupEntry 17} mtaGroupLastOutboundActivity OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last time that this group had a successful outbound association for purposes of message delivery." ::= {mtaGroupEntry 18} mtaGroupLastOutboundAssociationAttempt OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Time since the last time that this group attempted to make an outbound association for purposes of message delivery." ::= {mtaGroupEntry 34} mtaGroupRejectedInboundAssociations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound associations the group has rejected, since group creation. Rejected associations are not counted in the accumulated association totals." ::= {mtaGroupEntry 19} mtaGroupFailedOutboundAssociations OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number associations where the group was the initiator and association establishment has failed, since group creation. Failed associations are not counted in the accumulated association totals." ::= {mtaGroupEntry 20} mtaGroupInboundRejectionReason OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The failure reason, if any, for the last association this group refused to respond to. If no association attempt has been made since the MTA was initialized the value should be 'never'." ::= {mtaGroupEntry 21} mtaGroupOutboundConnectFailureReason OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The failure reason, if any, for the last association attempt this group initiated. If no association attempt has been made since the MTA was initialized the value should be 'never'." ::= {mtaGroupEntry 22} mtaGroupScheduledRetry OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of time until this group is next scheduled to attempt to make an association." ::= {mtaGroupEntry 23} mtaGroupMailProtocol OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "An identification of the protocol being used by this group. For an group employing OSI protocols, this will be the Application Context. For Internet applications, OID values of the form {applTCPProtoID port} or {applUDPProtoID port} are used for TCP-based and UDP-based protocols, respectively. In either case 'port' corresponds to the primary port number being used by the protocol. The usual IANA procedures may be used to register ports for new protocols. applTCPProtoID and applUDPProtoID are defined in the NETWORK-SERVICES-MIB, RFC 2788." ::= {mtaGroupEntry 24} mtaGroupName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A descriptive name for the group. If this group connects to a single remote MTA this should be the name of that MTA. If this in turn is an Internet MTA this should be the domain name. For an OSI MTA it should be the string encoded distinguished name of the managed object using the format defined in RFC 2253. For X.400(1984) MTAs which do not have a Distinguished Name, the RFC 2156 syntax 'mta in globalid' used in X400-Received: fields can be used." ::= {mtaGroupEntry 25} mtaGroupSuccessfulConvertedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that have been successfully converted from one form to another in this group since group creation." ::= {mtaGroupEntry 26} mtaGroupFailedConvertedMessages OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages for which an unsuccessful attempt was made to convert them from one form to another in this group since group creation." ::= {mtaGroupEntry 27} mtaGroupDescription OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the group's purpose. This information is intended to identify the group in a status display." ::= {mtaGroupEntry 28} mtaGroupURL OBJECT-TYPE SYNTAX URLString MAX-ACCESS read-only STATUS current DESCRIPTION "A URL pointing to a description of the group. This information is intended to identify and briefly describe the group in a status display." ::= {mtaGroupEntry 29} mtaGroupCreationTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "Time since this group was first created." ::= {mtaGroupEntry 30} mtaGroupHierarchy OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Describes how this group fits into the hierarchy. A positive value is interpreted as an mtaGroupIndex value for some other group whose variables include those of this group (and usually others). A negative value is interpreted as a group collection code: Groups with common negative hierarchy values comprise one particular breakdown of MTA activity as a whole. A zero value means that this MIB implementation doesn't implement hierarchy indicators and thus the overall group hierarchy cannot be determined." ::= {mtaGroupEntry 31} mtaGroupOldestMessageId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Message ID of the oldest message in the group's queue. Whenever possible this should be in the form of an RFC 822 msg-id; X.400 may convert X.400 message identifiers to this form by following the rules laid out in RFC2156." ::= {mtaGroupEntry 32} mtaGroupLoopsDetected OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A message loop is defined as a situation where the MTA decides that a given message will never be delivered to one or more recipients and instead will continue to loop endlessly through one or more MTAs. This variable counts the number of times the MTA has detected such a situation in conjunction with something associated with this group since group creation. Note that the mechanism MTAs use to detect loops (e.g., trace field counting, count of references to this MTA in a trace field, examination of DNS or other directory information, etc.), the level at which loops are detected (e.g., per message, per recipient, per directory entry, etc.), and the handling of a loop once it is detected (e.g., looping messages are held, looping messages are bounced or sent to the postmaster, messages that the MTA knows will loop won't be accepted, etc.) vary widely from one MTA to the next and cannot be inferred from this variable." ::= {mtaGroupEntry 33} -- The mtaGroupAssociationTable provides a means of correlating -- entries in the network services association table with the -- MTA group responsible for the association. mtaGroupAssociationTable OBJECT-TYPE SYNTAX SEQUENCE OF MtaGroupAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holding information regarding the associations for each MTA group." ::= {mta 3} mtaGroupAssociationEntry OBJECT-TYPE SYNTAX MtaGroupAssociationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry holding information regarding the associations for each MTA group." INDEX {applIndex, mtaGroupIndex, mtaGroupAssociationIndex} ::= {mtaGroupAssociationTable 1} MtaGroupAssociationEntry ::= SEQUENCE { mtaGroupAssociationIndex INTEGER } mtaGroupAssociationIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Reference into association table to allow correlation of this group's active associations with the association table." ::= {mtaGroupAssociationEntry 1} -- The mtaGroupErrorTable gives each group a way of tallying -- the specific errors it has encountered. The mechanism -- defined here uses RFC 1893 status codes to identify -- various specific errors. There are also classes for generic -- errors of various sorts, and the entire mechanism is also -- extensible, in that new error codes can be defined at any -- time. mtaGroupErrorTable OBJECT-TYPE SYNTAX SEQUENCE OF MtaGroupErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table holding information regarding accumulated errors for each MTA group." ::= {mta 5} mtaGroupErrorEntry OBJECT-TYPE SYNTAX MtaGroupErrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry holding information regarding accumulated errors for each MTA group." INDEX {applIndex, mtaGroupIndex, mtaStatusCode} ::= {mtaGroupErrorTable 1} MtaGroupErrorEntry ::= SEQUENCE { mtaStatusCode INTEGER (4000000..5999999), mtaGroupInboundErrorCount Counter32, mtaGroupInternalErrorCount Counter32, mtaGroupOutboundErrorCount Counter32 } mtaGroupInboundErrorCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of errors of a given type that have been accumulated in association with a particular group while processing incoming messages. In the case of SMTP these will typically be errors reporting by an SMTP server to the remote client; in the case of X.400 these will typically be errors encountered while processing an incoming message." ::= {mtaGroupErrorEntry 1} mtaGroupInternalErrorCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of errors of a given type that have been accumulated in association with a particular group during internal MTA processing." ::= {mtaGroupErrorEntry 2} mtaGroupOutboundErrorCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of the number of errors of a given type that have been accumulated in association with a particular group's outbound connection activities. In the case of an SMTP client these will typically be errors reported while attempting to contact or while communicating with the remote SMTP server. In the case of X.400 these will typically be errors encountered while constructing or attempting to deliver an outgoing message." ::= {mtaGroupErrorEntry 3} mtaStatusCode OBJECT-TYPE SYNTAX INTEGER (4000000..5999999) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index capable of representing an Enhanced Mail System Status Code. Enhanced Mail System Status Codes are defined in RFC 1893. These codes have the form class.subject.detail Here 'class' is either 2, 4, or 5 and both 'subject' and 'detail' are integers in the range 0..999. Given a status code the corresponding index value is defined to be ((class * 1000) + subject) * 1000 + detail. Both SMTP error response codes and X.400 reason and diagnostic codes can be mapped into these codes, resulting in a namespace capable of describing most error conditions a mail system encounters in a generic yet detailed way." ::= {mtaGroupErrorEntry 4} -- Conformance information mtaConformance OBJECT IDENTIFIER ::= {mta 4} mtaGroups OBJECT IDENTIFIER ::= {mtaConformance 1} mtaCompliances OBJECT IDENTIFIER ::= {mtaConformance 2} -- Compliance statements mtaCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 1566 implementations which support the Mail Monitoring MIB for basic monitoring of MTAs." MODULE -- this module MANDATORY-GROUPS {mtaRFC1566Group} ::= {mtaCompliances 1} mtaAssocCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 1566 implementations which support the Mail Monitoring MIB for monitoring of MTAs and their associations." MODULE -- this module MANDATORY-GROUPS {mtaRFC1566Group, mtaRFC1566AssocGroup} ::= {mtaCompliances 2} mtaRFC2249Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2249 implementations which support the Mail Monitoring MIB for basic monitoring of MTAs." MODULE -- this module MANDATORY-GROUPS {mtaRFC2249Group} ::= {mtaCompliances 5} mtaRFC2249AssocCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2249 implementations which support the Mail Monitoring MIB for monitoring of MTAs and their associations." MODULE -- this module MANDATORY-GROUPS {mtaRFC2249Group, mtaRFC2249AssocGroup} ::= {mtaCompliances 6} mtaRFC2249ErrorCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2249 implementations which support the Mail Monitoring MIB for monitoring of MTAs and detailed errors." MODULE -- this module MANDATORY-GROUPS {mtaRFC2249Group, mtaRFC2249ErrorGroup} ::= {mtaCompliances 7} mtaRFC2249FullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2249 implementations which support the full Mail Monitoring MIB for monitoring of MTAs, associations, and detailed errors." MODULE -- this module MANDATORY-GROUPS {mtaRFC2249Group, mtaRFC2249AssocGroup, mtaRFC2249ErrorGroup} ::= {mtaCompliances 8} mtaRFC2789Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2789 implementations which support the Mail Monitoring MIB for basic monitoring of MTAs." MODULE -- this module MANDATORY-GROUPS {mtaRFC2789Group} ::= {mtaCompliances 9} mtaRFC2789AssocCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2789 implementations which support the Mail Monitoring MIB for monitoring of MTAs and their associations." MODULE -- this module MANDATORY-GROUPS {mtaRFC2789Group, mtaRFC2789AssocGroup} ::= {mtaCompliances 10} mtaRFC2789ErrorCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2789 implementations which support the Mail Monitoring MIB for monitoring of MTAs and detailed errors." MODULE -- this module MANDATORY-GROUPS {mtaRFC2789Group, mtaRFC2789ErrorGroup} ::= {mtaCompliances 11} mtaRFC2789FullCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for RFC 2789 implementations which support the full Mail Monitoring MIB for monitoring of MTAs, associations, and detailed errors." MODULE -- this module MANDATORY-GROUPS {mtaRFC2789Group, mtaRFC2789AssocGroup, mtaRFC2789ErrorGroup} ::= {mtaCompliances 12} -- Units of conformance mtaRFC1566Group OBJECT-GROUP OBJECTS { mtaReceivedMessages, mtaStoredMessages, mtaTransmittedMessages, mtaReceivedVolume, mtaStoredVolume, mtaTransmittedVolume, mtaReceivedRecipients, mtaStoredRecipients, mtaTransmittedRecipients, mtaGroupReceivedMessages, mtaGroupRejectedMessages, mtaGroupStoredMessages, mtaGroupTransmittedMessages, mtaGroupReceivedVolume, mtaGroupStoredVolume, mtaGroupTransmittedVolume, mtaGroupReceivedRecipients, mtaGroupStoredRecipients, mtaGroupTransmittedRecipients, mtaGroupOldestMessageStored, mtaGroupInboundAssociations, mtaGroupOutboundAssociations, mtaGroupAccumulatedInboundAssociations, mtaGroupAccumulatedOutboundAssociations, mtaGroupLastInboundActivity, mtaGroupLastOutboundActivity, mtaGroupRejectedInboundAssociations, mtaGroupFailedOutboundAssociations, mtaGroupInboundRejectionReason, mtaGroupOutboundConnectFailureReason, mtaGroupScheduledRetry, mtaGroupMailProtocol, mtaGroupName} STATUS current DESCRIPTION "A collection of objects providing basic monitoring of MTAs. This is the original set of such objects defined in RFC 1566." ::= {mtaGroups 10} mtaRFC1566AssocGroup OBJECT-GROUP OBJECTS { mtaGroupAssociationIndex} STATUS current DESCRIPTION "A collection of objects providing monitoring of MTA associations. This is the original set of such objects defined in RFC 1566." ::= {mtaGroups 11} mtaRFC2249Group OBJECT-GROUP OBJECTS { mtaReceivedMessages, mtaStoredMessages, mtaTransmittedMessages, mtaReceivedVolume, mtaStoredVolume, mtaTransmittedVolume, mtaReceivedRecipients, mtaStoredRecipients, mtaTransmittedRecipients, mtaSuccessfulConvertedMessages, mtaFailedConvertedMessages, mtaGroupReceivedMessages, mtaGroupRejectedMessages, mtaGroupStoredMessages, mtaGroupTransmittedMessages, mtaGroupReceivedVolume, mtaGroupStoredVolume, mtaGroupTransmittedVolume, mtaGroupReceivedRecipients, mtaGroupStoredRecipients, mtaGroupTransmittedRecipients, mtaGroupOldestMessageStored, mtaGroupInboundAssociations, mtaGroupOutboundAssociations, mtaLoopsDetected, mtaGroupAccumulatedInboundAssociations, mtaGroupAccumulatedOutboundAssociations, mtaGroupLastInboundActivity, mtaGroupLastOutboundActivity, mtaGroupLastOutboundAssociationAttempt, mtaGroupRejectedInboundAssociations, mtaGroupFailedOutboundAssociations, mtaGroupInboundRejectionReason, mtaGroupOutboundConnectFailureReason, mtaGroupScheduledRetry, mtaGroupMailProtocol, mtaGroupName, mtaGroupSuccessfulConvertedMessages, mtaGroupFailedConvertedMessages, mtaGroupDescription, mtaGroupURL, mtaGroupCreationTime, mtaGroupHierarchy, mtaGroupOldestMessageId, mtaGroupLoopsDetected} STATUS current DESCRIPTION "A collection of objects providing basic monitoring of MTAs. This group was originally defined in RFC 2249." ::= {mtaGroups 4} mtaRFC2249AssocGroup OBJECT-GROUP OBJECTS { mtaGroupAssociationIndex} STATUS current DESCRIPTION "A collection of objects providing monitoring of MTA associations. This group was originally defined in RFC 2249." ::= {mtaGroups 5} mtaRFC2249ErrorGroup OBJECT-GROUP OBJECTS { mtaGroupInboundErrorCount, mtaGroupInternalErrorCount, mtaGroupOutboundErrorCount} STATUS current DESCRIPTION "A collection of objects providing monitoring of detailed MTA errors. This group was originally defined in RFC 2249." ::= {mtaGroups 6} mtaRFC2789Group OBJECT-GROUP OBJECTS { mtaReceivedMessages, mtaStoredMessages, mtaTransmittedMessages, mtaReceivedVolume, mtaStoredVolume, mtaTransmittedVolume, mtaReceivedRecipients, mtaStoredRecipients, mtaTransmittedRecipients, mtaSuccessfulConvertedMessages, mtaFailedConvertedMessages, mtaGroupReceivedMessages, mtaGroupRejectedMessages, mtaGroupStoredMessages, mtaGroupTransmittedMessages, mtaGroupReceivedVolume, mtaGroupStoredVolume, mtaGroupTransmittedVolume, mtaGroupReceivedRecipients, mtaGroupStoredRecipients, mtaGroupTransmittedRecipients, mtaGroupOldestMessageStored, mtaGroupInboundAssociations, mtaGroupOutboundAssociations, mtaLoopsDetected, mtaGroupAccumulatedInboundAssociations, mtaGroupAccumulatedOutboundAssociations, mtaGroupLastInboundActivity, mtaGroupLastOutboundActivity, mtaGroupLastOutboundAssociationAttempt, mtaGroupRejectedInboundAssociations, mtaGroupFailedOutboundAssociations, mtaGroupInboundRejectionReason, mtaGroupOutboundConnectFailureReason, mtaGroupScheduledRetry, mtaGroupMailProtocol, mtaGroupName, mtaGroupSuccessfulConvertedMessages, mtaGroupFailedConvertedMessages, mtaGroupDescription, mtaGroupURL, mtaGroupCreationTime, mtaGroupHierarchy, mtaGroupOldestMessageId, mtaGroupLoopsDetected} STATUS current DESCRIPTION "A collection of objects providing basic monitoring of MTAs. This is the appropriate group for RFC 2789." ::= {mtaGroups 7} mtaRFC2789AssocGroup OBJECT-GROUP OBJECTS { mtaGroupAssociationIndex} STATUS current DESCRIPTION "A collection of objects providing monitoring of MTA associations. This is the appropriate group for RFC 2789 association monitoring." ::= {mtaGroups 8} mtaRFC2789ErrorGroup OBJECT-GROUP OBJECTS { mtaGroupInboundErrorCount, mtaGroupInternalErrorCount, mtaGroupOutboundErrorCount} STATUS current DESCRIPTION "A collection of objects providing monitoring of detailed MTA errors. This is the appropriate group for RFC 2789 error monitoring." ::= {mtaGroups 9} END
Back to File Manager