Edit File - File Manager

Edit File: texinfos.am

## automake - create Makefile.in from Makefile.am

## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2, or (at your option)
## any later version.

## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.

## You should have received a copy of the GNU General Public License
## along with this program.  If not, see <https://www.gnu.org/licenses/>.

## ----------- ##
## Variables.  ##
## ----------- ##

if %?LOCAL-TEXIS%
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
endif %?LOCAL-TEXIS%

## ---------- ##
## Building.  ##
## ---------- ##

## The way to make PostScript, for those who want it.
if %?LOCAL-TEXIS%
DVIPS = dvips
.dvi.ps:
	%AM_V_DVIPS%TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) %TEXIQUIET% -o $@ $<
endif %?LOCAL-TEXIS%

.PHONY: dvi dvi-am html html-am info info-am pdf pdf-am ps ps-am
if %?SUBDIRS%
RECURSIVE_TARGETS += dvi-recursive html-recursive info-recursive
RECURSIVE_TARGETS += pdf-recursive ps-recursive
dvi: dvi-recursive
html: html-recursive
info: info-recursive
pdf: pdf-recursive
ps: ps-recursive
else !%?SUBDIRS%
dvi: dvi-am
html: html-am
info: info-am
pdf: pdf-am
ps: ps-am
endif !%?SUBDIRS%

if %?LOCAL-TEXIS%
dvi-am: $(DVIS)
html-am: $(HTMLS)
info-am: $(INFO_DEPS)
pdf-am: $(PDFS)
ps-am: $(PSS)
else ! %?LOCAL-TEXIS%
dvi-am:
html-am:
info-am:
pdf-am:
ps-am:
endif ! %?LOCAL-TEXIS%

## ------------ ##
## Installing.  ##
## ------------ ##

## Some code should be run only if install-info actually exists, and
## if the user doesn't request it not to be run (through the
## 'AM_UPDATE_INFO_DIR' environment variable).  See automake bug#9773
## and Debian Bug#543992.
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac

## Look in both . and srcdir because the info pages might have been
## rebuilt in the build directory.  Can't cd to srcdir; that might
## break a possible install-sh reference.
##
## Funny name due to --cygnus influence; we want to reserve
## 'install-info' for the user.
##
## TEXINFOS primary are always installed in infodir, hence install-data
## is hard coded.
if %?INSTALL-INFO%
if %?LOCAL-TEXIS%
am__installdirs += "$(DESTDIR)$(infodir)"
install-data-am: install-info-am
endif %?LOCAL-TEXIS%
endif %?INSTALL-INFO%
.PHONY: \
  install-dvi  install-dvi-am \
  install-html install-html-am \
  install-info install-info-am \
  install-pdf  install-pdf-am \
  install-ps   install-ps-am

if %?SUBDIRS%
RECURSIVE_TARGETS += \
  install-dvi-recursive \
  install-html-recursive \
  install-info-recursive \
  install-pdf-recursive \
  install-ps-recursive
install-dvi: install-dvi-recursive
install-html: install-html-recursive
install-info: install-info-recursive
install-pdf: install-pdf-recursive
install-ps: install-ps-recursive
else !%?SUBDIRS%
install-dvi: install-dvi-am
install-html: install-html-am
install-info: install-info-am
install-pdf: install-pdf-am
install-ps: install-ps-am
endif !%?SUBDIRS%

if %?LOCAL-TEXIS%

include inst-vars.am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
## This indirection is required to work around a bug of the Solaris 10
## shell /usr/xpg4/bin/sh.  The description of the bug can be found at
## <https://lists.gnu.org/archive/html/bug-autoconf/2011-11/msg00005.html>
## and the report of the original failure can be found at automake
## bug#10026 <https://debbugs.gnu.org/cgi/bugreport.cgi?bug=10026#23>
	  d2=$$d$$p; \
	  if test -d "$$d2"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d2"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
	fi; \
	for file in $$list; do \
## Strip possible $(srcdir) prefix.
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
## 8+3 filesystems cannot deal with foo.info-N filenames: they all
## conflict.  DJGPP comes with a tool, DJTAR, that will rename these
## files to foo.iNN while extracting the archive.  DJGPP's makeinfo
## is patched to grok these filenames.  However we have to account
## for the renaming when installing the info files.
##
## If $file == foo.info, then $file_i == foo.i.  The reason we use two
## shell commands instead of one ('s|\.info$$|.i|') is so that a suffix-less
## 'foo' becomes 'foo.i' too.
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
## Strip directory
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
## Run ":" after install-info in case install-info fails.  We really
## don't care about failures here, because they can be spurious.  For
## instance if you don't have a dir file, install-info will fail.  I
## think instead it should create a new dir file for you.  This bug
## causes the "make distcheck" target to fail reliably.
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
## Use "|| :" here because Sun make passes -e to sh; if install-info
## fails then we'd fail if we used ";".
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done

else ! %?LOCAL-TEXIS%
install-dvi-am:
install-html-am:
install-info-am:
install-pdf-am:
install-ps-am:
endif ! %?LOCAL-TEXIS%

## -------------- ##
## Uninstalling.  ##
## -------------- ##

if %?LOCAL-TEXIS%
.PHONY uninstall-am: \
  uninstall-dvi-am \
  uninstall-html-am \
  uninstall-info-am \
  uninstall-ps-am \
  uninstall-pdf-am

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
## $f can be a directory, hence the -r.
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
## Run two loops here so that we can handle PRE_UNINSTALL and
## NORMAL_UNINSTALL correctly.
	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
## install-info needs the actual info file.  We use the installed one,
## rather than relying on one still being in srcdir or builddir.
## However, "make uninstall && make uninstall" should not fail,
## so we ignore failure if the file did not exist.
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
## DJGPP-style info files.  See comment in install-info-am.
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done
endif %?LOCAL-TEXIS%

if %?LOCAL-TEXIS%
.PHONY: dist-info
dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
## Strip possible $(srcdir) prefix.
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
## Strip leading '$$d/'.
	      relfile=`expr "$$file" : "$$d/$.*$"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done
endif %?LOCAL-TEXIS%

## ---------- ##
## Cleaning.  ##
## ---------- ##

## The funny name is due to --cygnus influence; in Cygnus mode,
## 'clean-info' is a target that users can use.

if %?LOCAL-TEXIS%
.PHONY mostlyclean-am: mostlyclean-aminfo
.PHONY: mostlyclean-aminfo
mostlyclean-aminfo:
## Use '-rf', not just '-f', because the %*CLEAN% substitutions can also
## contain any directory created by "makeinfo --html", as well as the
## '*.t2d' and '*.t2p' directories used by texi2dvi and texi2pdf.
	-rm -rf %MOSTLYCLEAN%

.PHONY clean-am: clean-aminfo
clean-aminfo:
## Use '-rf', not just '-f'; see comments in 'mostlyclean-aminfo'
## above for details.
?TEXICLEAN?	-test -z "%TEXICLEAN%" \
?TEXICLEAN?	|| rm -rf %TEXICLEAN%

.PHONY maintainer-clean-am: maintainer-clean-aminfo
maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
## .iNN files are DJGPP-style info files.
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
## Use '-rf', not just '-f'; see comments in 'mostlyclean-aminfo'
## above for details.
?MAINTCLEAN?	-test -z "%MAINTCLEAN%" \
?MAINTCLEAN?	|| rm -rf %MAINTCLEAN%

endif %?LOCAL-TEXIS%

Back to File Manager